Converters, Terminal Equipment and Converter Boards
Serviceliste
-
NA1011 / NA1011-ET (SDI to HDMI)
- One 3G/HD-SDI input supporting the following bit rates due to SMPTE292M and SMPTE424M (level A): 1.485 Gbps, 1.485/1.001 Gbps, 2.97 Gbps, 2.97/1.001 Gbps
- SDI loop out with reclocking
- Input & output connector: 75Ohm MCX jacks
- One HDMI output, HDMI 1.3 compliant, no HDCP support
- Output connector: 19 pin HDMI connector
- Output data format: RGB444, 3x10 bit
- Supported input and output video formats: 1080i at 50/59.94/60 Hz, 1080p at 50/25/24/59.94/29.97/23.98/60/30 Hz, 720p at 50/59.94/60 Hz
- Native video signal processing and formatting only. No image scaling, no format conversion.
- Power input + 12V DC regulated
- PCB dimensions 38mm x 38mm
- NA1011-ET, extended operating temperature range version
-
NA1012 / NA1012-ET (HDMI to SDI)Listenelement 2
- One HDMI input, HDMI 1.4a/DVI 1.0 compliant
- RGB444, YCbCr444 and 422 input format support
- Two SDI outputs supporting the following bit rates due to SMPTE292M and SMPTE424M: 1.485 Gbps, 1.485/1.001 Gbps, 2.97 Gbps, 2.97/1.001 Gbps
- Supported output video formats: 1080i at 50/59.94/60, 1080p at 50/25/24/59.94/29.97/23.98/60/30, 720p at 50/ 59.94/60
- Output connectors: 75 ohms MCX jacks
- Native video signal processing and formatting only. No image scaling, no format conversion.
- Power input + 12V DC regulated
- PCB dimensions 38mm x 38mm
- NA1012-ET, extended operating temperature range version
-
NA1012B-ET
- HDMI 1.4a video input
- HDMI input over board to board connector
- Resolution up to 1920x1080p @ 60fps
- RGB444, YCbCr444 and YCbCr422 input format support
- Two SDI outputs supporting bit rates due to SMPTE292M and SMPTE424M,1.485 Gbps, 1.485/1.001 Gbps, 2.97 Gbps, 2.97/1.001 Gbps
- Supported video formats: 1080i at 50/59.94/60, 1080p at 50/25/24/59.94/29.97/23.98/60/30, 720p at 50/ 59.94/60
- Video output connectors: 75 ohms MCX jacks
- Native video signal processing and encoding only. No image scaling, no format conversion.
- Power input + 5V up to +15V DC regulated
- PCB dimensions 38mm x 38mm
-
RC3310 (Optical Fiber SDI to Coaxial SDI)Listenelement 3
- Dual SDI video output up to 3Gbit/s (1080p60)
- Error free opical reception
- Input range 1260nm - 1620nm
- Simplex LC/PC single mode input connection
- SMPTE297M-2006 compliant
- Hot pluggable
- 10km distances when used with RC3311 or TL7070
- Supply voltage: 12V DC regulated, power supply included
- Compact size 105mm x 40mm x 22mm
- Complies to CE and RoHS directives
-
RC8080
- PCOC Terminal
- SDI input/output: FHD 3G/HD-SDI Dual Reclocked out
- HDMI out: FHD HDMI 1.4b
- Fiber IF: Optional
- Related standards: SMPTE ST425-3:2015, SMPTE ST424
-
RC8088
- PCOC Terminal
- SDI input/output: UHD Dual Link 3G FHD 3G/HD-SDI Reclocked out
- HDMI out: FHD HDMI 1.4b
- Fiber IF: Optional
- Related standards: SMPTE ST2081-10:2015, SMPTE ST425-3:2015, SMPTE ST424